The panel lights up but it's not firing

You can program the Bangalore and you can see its program running on the screen, but it doesn't fire.

Could the bottle of gas be empty?
If the Bangalore seems to operate ok but doesn't fire when the time comes, the gas bottle could be empty. The Bangalore isn't able to tell you ...
Sun, 25 Jan, 2015 at 8:41 PM
Check the connectors on the back of the board
If the display lights up and seems to work OK but the Bangalore doesn't fire, there could be loose connections on the back of the board. See &quo...
Sun, 25 Jan, 2015 at 8:43 PM
Check the gas jet is clear
If the gas jet is blocked, it could stop gas entering the ignition chamber. See "How do I clean out my gas jet?" for more information.
Sun, 25 Jan, 2015 at 8:56 PM
Is the spark plug the correct type?
Check the spark plug to make sure the right type is fitted. See "How do I replace the spark plug?" for more information.
Sun, 25 Jan, 2015 at 8:57 PM
Try altering the position of the injection core
If the injection core isn't set at the best height in the injection tube, it could cause your gun to fire with a WHUMP rather that with a BANG, or even...
Sun, 25 Jan, 2015 at 9:07 PM